ZBStick-P2/P7 - ZigStar Stick Pro¶
ZigStar - ZBStick Pro is a universal Zigbee USB stick.
It can be used as a universal Zigbee gateway in Home Assistant or other open-source platforms via ZHA or Zigbee2MQTT to locally control all your Zigbee sub-devices, so you don’t need to invest on the Zigbee hubs for different brands, all you need is a universal gateway – ZigStar Dongle Pro! is coming in two flavors: CC2652P2 & CC2652P7,more stable,more range,more devices!
Features:¶
- TI CC2652P2 or TI CC2652P7 is targeting Zigbee,Matter,Thread with +19.5-dBm high-power amplifier onboard
- CC2652P7 has double the flash storage and SRAM compared to the CC2652P this ensure high reliability of operations
- BOOT,RESET Buttons
- LED's for indication of status
- Compatible with Z2M and ZHA by default
- SMA antenna port for an external antenna
- Easy programming with ZigStar Multi Tool, ZigStar HA Add-on. No external programmer needed!
- Auto Bootloader (No button press) to enter flashing mode
- Communicates via the common CP2102 USB-UART Bridge
- Plug & Play, comes pre-flashed
Comparison¶
| ZigStar ZBStick-P7 | ZigStar Stick v4 | ZigStar Stick v4 | Sonoff ZBDongle-P | |
|---|---|---|---|---|
| SoC | CC2652P7 | CC2652P2 | CC2652P2 | CC2652P2 |
| Flash Memory |  704 (kByte) |
352 (kByte) | 352 (kByte) | 352 (kByte) |
| RAM | 152 (kByte) |
88 (kByte) | 88 (kByte) | 88 (kByte) |
| Supported protocols | Matter, Zigbee 3.0, Thread | Zigbee 3.0, Thread | Zigbee 3.0, Thread | Zigbee 3.0, Thread |
| Serial Interface Protocol | ZNP | ZNP | ZNP | ZNP |
| USB-Serial Chip | CP2102(N) | CP2102(N) | CH340C | CP2102(N) |
| Auto Bootloader (No button press) | Yes |
Yes | Yes | No (Only buttons) |
| Output Power | 5dBm(default),20dBm max | 5dBm(default),20dBm max | 5dBm(default),20dBm max | 5dBm(default),20dBm max |
| Direct Children Connections | 50 | 50 | 50 | 50 |
| Route Connections | 300 |
200 | 200 | 200 |
| Assembly and Testing | Factory |
Factory | DYI | Factory |
Purchase¶
Assembled versions of ZBStick-P is available for purchase.
Shipping is done only from China
Each order contains a fully assembled and tested device along with a plastic enclosure and a small +3dBi antenna.